انتقل إلى المحتوى الرئيسي

كيفية قفل أو حماية الخلايا بعد إدخال البيانات أو إدخالها في Excel؟

لنفترض أن لديك ورقة عمل وأن نطاقًا معينًا فقط من الخلايا الفارغة يحتاج إلى إدخال البيانات ، وبعد الانتهاء من إدخال البيانات ، تحتاج إلى قفل الخلايا تلقائيًا لمنع التغييرات مرة أخرى. كيف يمكنك أن تفعل لتحقيق ذلك؟ هذه المقالة يمكن أن تساعدك.

قفل الخلايا أو حمايتها بعد إدخال البيانات أو الإدخال باستخدام رمز VBA


قفل الخلايا أو حمايتها بعد إدخال البيانات أو الإدخال باستخدام رمز VBA

على سبيل المثال ، نطاق معين من الخلايا الفارغة هو A1: F8. يرجى القيام بما يلي لقفل هذه الخلايا بعد إدخال البيانات في Excel.

1. يرجى إلغاء قفل هذا النطاق أولاً ، وتحديد الخلايا والنقر بزر الماوس الأيمن ، ثم اختيار تنسيق الخلايا في قائمة النقر بزر الماوس الأيمن ، وفي ملف تنسيق الخلايا مربع الحوار ، وإلغاء تحديد مقفل مربع تحت الحماية علامة التبويب ، وأخيرًا النقر فوق OK زر. انظر لقطة الشاشة:

2. انقر التقيم > حماية ورقة. وحدد كلمة مرور لحماية ورقة العمل هذه.

3. انقر بزر الماوس الأيمن فوق علامة تبويب الورقة ، وحدد عرض الرمز من قائمة النقر بزر الماوس الأيمن. ثم انسخ والصق رمز فبا أدناه في نافذة الكود. انظر لقطة الشاشة:

رمز فبا: قفل الخلايا أو حمايتها بعد إدخال البيانات أو إدخالها

Dim mRg As Range
Dim mStr As String

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Range("A1:F8"), Target) Is Nothing Then
    Set mRg = Target.Item(1)
    mStr = mRg.Value
End If
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
    Dim xRg As Range
    On Error Resume Next
    Set xRg = Intersect(Range("A1:F8"), Target)
    If xRg Is Nothing Then Exit Sub
    Target.Worksheet.Unprotect Password:="123"
    If xRg.Value <> mStr Then xRg.Locked = True
    Target.Worksheet.Protect Password:="123" 
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Range("A1:F8"), Target) Is Nothing Then
    Set mRg = Target.Item(1)
     mStr = mRg.Value
End If
End Sub

ملاحظات: في الكود ، "A1: F8" هو النطاق الذي تحتاجه لإدخال البيانات ؛ و "123" هي كلمة مرور ورقة العمل المحمية هذه. الرجاء تغييرها كما تريد.

4. صحافة قديم + Q مفاتيح في نفس الوقت لإغلاق ميكروسوفت فيسوال باسيك للتطبيقات نافذة.

بعد الانتهاء من إدخال البيانات إلى خلايا النطاق A1: F8 ، سيتم قفلها تلقائيًا. وستحصل على مربع حوار موجه إذا حاولت تغيير أي محتوى خلية من هذا النطاق. انظر لقطة الشاشة:


مقالات ذات صلة:

أفضل أدوات إنتاجية المكتب

🤖 مساعد Kutools AI: إحداث ثورة في تحليل البيانات على أساس: التنفيذ الذكي   |  إنشاء التعليمات البرمجية  |  إنشاء صيغ مخصصة  |  تحليل البيانات وإنشاء الرسوم البيانية  |  استدعاء وظائف Kutools...
الميزات الشعبية: البحث عن التكرارات أو تمييزها أو تحديدها   |  حذف الصفوف الفارغة   |  دمج الأعمدة أو الخلايا دون فقدان البيانات   |   جولة بدون صيغة 
سوبر بحث: معايير متعددة VLookup    VLookup ذات القيمة المتعددة  |   VLookup عبر أوراق متعددة   |   بحث غامض ....
قائمة منسدلة متقدمة: إنشاء القائمة المنسدلة بسرعة   |  القائمة المنسدلة التابعة   |  قائمة منسدلة متعددة التحديد ....
مدير العمود: إضافة عدد محدد من الأعمدة  |  نقل الأعمدة  |  تبديل حالة رؤية الأعمدة المخفية  |  مقارنة النطاقات والأعمدة 
الميزات المميزة: التركيز على الشبكة   |  عرض تصميم   |   شريط الفورمولا الكبير    مدير المصنفات والأوراق   |  مكتبة الموارد (النص السيارات)   |  منتقي التاريخ   |  اجمع أوراق العمل   |  تشفير/فك تشفير الخلايا    إرسال رسائل البريد الإلكتروني عن طريق القائمة   |  سوبر تصفية   |   مرشح خاص (تصفية غامق / مائل / يتوسطه خط ...) ...
أفضل 15 مجموعة أدوات12 نص الأدوات (إضافة نص, إزالة الأحرف، ...)   |   +50 رسم الأنواع (مخطط جانت، ...)   |   40+ عملي الصيغ (احسب العمر على أساس تاريخ الميلاد، ...)   |   19 إدخال الأدوات (أدخل رمز الاستجابة السريعة, إدراج صورة من المسار، ...)   |   12 تحويل الأدوات (أرقام إلى كلمات, نتيجة تحويل عملة، ...)   |   7 دمج وتقسيم الأدوات (الجمع بين الصفوف المتقدمة, تقسيم الخلايا، ...)   |   ... و اكثر

عزز مهاراتك في Excel باستخدام Kutools for Excel، واختبر كفاءة لم يسبق لها مثيل. يقدم Kutools for Excel أكثر من 300 ميزة متقدمة لتعزيز الإنتاجية وتوفير الوقت.  انقر هنا للحصول على الميزة التي تحتاجها أكثر...

الوصف


يجلب Office Tab الواجهة المبوبة إلى Office ، ويجعل عملك أسهل بكثير

  • تمكين التحرير والقراءة المبوبة في Word و Excel و PowerPointوالناشر والوصول و Visio والمشروع.
  • فتح وإنشاء مستندات متعددة في علامات تبويب جديدة من نفس النافذة ، بدلاً من النوافذ الجديدة.
  • يزيد من إنتاجيتك بنسبة 50٪ ، ويقلل مئات النقرات بالماوس كل يوم!
Comments (75)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
Good day, what I want to do is quite similar to the presented code however, the code only caters for individual data entry. My case is that I have a data entry interface but the given code doesn't follow the formulas before the selected cells which is substantial in my situation. Please, help me to resolve this. Thank you so much :D
This comment was minimized by the moderator on the site
I want to lock a particular range after an entry and allow only one entry in that range.
the range already contains a data validation.
This comment was minimized by the moderator on the site
Hi Rakesh Chand,
Assuming the specific range is A1:D7, when you select an entry in any data validation of that range, the worksheet will be protected.
Please apply the following VBA code to get it done.

Private Sub Worksheet_Change(ByVal Target As Range)
'Updated by Extendoffice 20220831
    Dim xRg As Range
    Dim Rg As Range
    On Error Resume Next
    Set Rg = Range("A1:D7")
    Set xRg = Intersect(Rg, Target)
    If xRg Is Nothing Then Exit Sub
       
    Rg.Locked = True
    
        Rg.Worksheet.Protect Password:="123"
    
End Sub
This comment was minimized by the moderator on the site
доброго времени суток!
Возможно ли с помощью кода сделать следующие?
Есть таблица, к примеру 6 столбцов, в которую последовательно вносят данные в 5 столбов (присутствует режим "выбор из списка данных" и формулы), а в 6-ом выбирается фамилия вносившего. Возможно ли блокировать полностью строку с внесенными данными, только после заполнения последней ячейке в этой строке (6-ой столбец)?
Выше указанный способ блокирует ввод данных в ячейки где есть выбор из списка данных на всём листе.
Если есть такой вариант, буду очень признателен за код.
Заранее Спасибо!
Rated 5 out of 5
This comment was minimized by the moderator on the site
Hi I am having an error with the deletion. Whenever I tried to click the delete the record a pop up will say "Microsoft Excel will permanently delete this sheet. Do you want to continue'.

Here's the code that I am using:

Sub Deletion()

Dim iRow As Long
Dim iSerial As Long


iSerial = Application.InputBox("Please enter Serial No. to delete the record.", "Delete", , , , , , 1)

On Error Resume Next

iRow = Application.WorksheetFunction.IfError _
(Application.WorksheetFunction.Match(iSerial, Sheets("Database").Range("A:A"), 0), 0)

On Error GoTo 0

If iRow = 0 Then

MsgBox "No record found.", vbOKOnly + vbCritical, "No Record"
Exit Sub

End If

Sheets("Database").Cells(iRow, 1).EntireRow.Delete Shift:=xlUp

End Sub


Please help me fix it. Thanks!
This comment was minimized by the moderator on the site
Hi guys. I need help and I'm new with VBA.
Say, I have Column BH with dropdown choices for Confirmed, Pending, and Cancelled.
All columns must remain unlocked for editing except for Columns A, BD, BE, and BF which must remain lock all the time.
If "Confirmed" is selected on Column BH, I want to lock the entire row before/next to it. Then, a password must be used if I want to edit the "Confirmed" row.
Can someone help me with this please?
Thanks in advance.

This comment was minimized by the moderator on the site
Good day...
Your tutorial is great!
I ran across a Run-Time error '13': during selection change if I select entire row. What is the turn-around for this? Any insight is much appreciated.
This comment was minimized by the moderator on the site
Hi,Which Excel version are you using?
This comment was minimized by the moderator on the site
Hi, This is all new to me. The formula is great. I want to lock cells D6:D36, H6:H35 & L6:L35 but can't get this to work. any help would be greatly appreciated.
This comment was minimized by the moderator on the site
Hi simon,If you want to lock cells in D6:D36, H6:H35 and L6:L35 separately after finish entering data in each range. Please do as follows.1. Select these three ranges by holding the Ctrl key;2. Do as the post described in step 1 to unlock these three ranges;3. Protect your worksheet with a password (Here my password is 123. This password will be used in the below code);4. Right click the sheet tab and then paste the below VBA code into the Code editor, and then press Alt + Q keys to close the Microsoft Visual Basic for Applications window.Notes: 1) In the code, you can change the ranges and password as you need;2)After pressing Alt + Q keys to close the code window, you need to shift to another worksheet and then go back to current sheet to make the code work. Otherwise, error will be occurred.<div data-tag="code">Dim mRg As Range
'Updated by Extendoffice 20201030
Dim mStr As String
Dim mStrAddress As String
Dim mArr
Private Sub Worksheet_Activate()
On Error Resume Next
Erase mArr()
mStrAddress = "D6:D36,H6:H35,L6:L35"
mArr = Split(mStrAddress, ",")
End Sub

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xI As Integer
For xI = 0 To UBound(mArr)
If Not Intersect(Range(mArr(xI)), Target) Is Nothing Then
Set mRg = Target.Item(1)
mStr = mRg.Value
Exit For
End If
Next
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
Dim xRg As Range
Dim xI As Integer
On Error Resume Next
For xI = 0 To UBound(mArr)
Set xRg = Null
Set xRg = Intersect(Range(mArr(xI)), Target)
If Not (xRg Is Nothing) Then
Target.Worksheet.Unprotect Password:="123"
If xRg.Value <> mStr Then xRg.Locked = True
Target.Worksheet.Protect Password:="123"

End If
Next
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xI As Integer
On Error Resume Next
For xI = 0 To UBound(mArr)
If Not Intersect(Range(mArr(xI)), Target) Is Nothing Then
Set mRg = Target.Item(1)
mStr = mRg.Value
End If
Next
End Sub
This comment was minimized by the moderator on the site
If Not Intersect(Range("CUSTOMER!"), Target) Is Nothing Then
I got an error. I want to protect the whole sheet
This comment was minimized by the moderator on the site
Good afternoon ... thank you again for this great resource. I do have one question. We have a shared document that is used by multiple users for input purposes. We have noticed that if User A enters data in a given cell, User A cannot edit per the code above (which is exactly what we want) but User B who the document is also shared with can delete the data that User A entered. Is there a revision for the code above that could be included in a shared document that has multiple users that are entering data.
This comment was minimized by the moderator on the site
Hi
I want to auto lock cell while i'm saving my worksheet
Can you help me how to do this in vba
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations