انتقل إلى المحتوى الرئيسي

قراءة / عرض عدد كبير من الصفوف والأعمدة بسهولة في Excel

كوتولس ل إكسيل

يعزز Excel مع 300+
ميزات قوية

إذا كنت تعمل في ورقة العمل التي تحتوي على بيانات ضخمة تحتوي على مئات الصفوف والأعمدة، فقد تواجه مشكلة بسهولة أثناء فحص البيانات والانتقال إليها من واحد إلى آخر مما سيضيع الوقت. لحل هذه المشكلة، تقوم الأداة المساعدة Grid Focus في Kutools for Excel بتسليط الضوء على الصف والعمود لجعل الخلية النشطة أو النطاق متميزًا كما هو موضح في لقطة الشاشة أدناه. تجربة

تخطيط القراءة بالرصاص 2


تفعيل الأداة المساعدة Grid Focus

انقر كوتولس > التركيز على الشبكة لتمكين هذه الأداة المساعدة ، أثناء تمكين Grid Focus ، يتم تمييز علامة التبويب.
تخطيط القراءة بالرصاص 2


إعدادات التركيز على الشبكة

إذا كنت تريد تغيير الإعدادات مثل الأشكال أو الأنماط أو الألوان أو الشفافية ، فيمكنك الانتقال إلى إعداد التركيز على الشبكةق الحوار للتغيير.

انقر كوتولس علامة التبويب ، وانتقل إلى النقر فوق السهم الموجود بجانبها التركيز على الشبكة لتوسيع القائمة المنسدلة ، ثم انقر فوق إعدادات تركيز الشبكة.
تخطيط القراءة بالرصاص 2

في مجلة إعدادات تركيز الشبكة مربع الحوار ، يمكنك تغيير الأشكال والأنماط والألوان والشفافية حسب حاجتك ، وفي نفس الوقت يمكنك أيضًا معاينة التغيير في أرسال قبل تطبيق التغييرات.
تخطيط القراءة بالرصاص 2

من نحن قم بتمييز منطقة الخلية النشطة و قم بتمييز المنطقة عند تحرير الخلية خيارات.

علامة قم بتمييز منطقة الخلية النشطة الخيار ، سيتم تمييز الخلية أو النطاق النشط.

تخطيط القراءة بالرصاص 2

إلغاء تحديد قم بتمييز منطقة الخلية النشطة الخيار ، ولكن ضع علامة في قم بتمييز المنطقة عند تحرير الخلية لن يتم تمييز الخلية أو النطاق النشط ، ولكن يتم تمييز المنطقة الفائضة.

تخطيط القراءة بالرصاص 2

قم بإلغاء تحديد كلا من قم بتمييز منطقة الخلية النشطة و قم بتمييز المنطقة عند تحرير الخلية الخيارات ، لن يتم تمييز الخلية أو النطاق النشط ومنطقة الفائض.

تخطيط القراءة بالرصاص 2

تمكين التركيز على الشبكة: ضع علامة على هذا الخيار ، بعد الإعدادات وانقر فوق OK، سيتم تمكين التركيز على الشبكة تلقائيًا.

الإعدادات الافتراضية: انقر فوق هذا الزر ، تمت استعادة إعدادات Grid Focus إلى الإعدادات الافتراضية لـ كوتولس.


الملاحظات:

1. يمكنك إلغاء هذه الأداة بالنقر فوق التركيز على الشبكة الأمر ، يتغير علامة التبويب إلى اللون الرمادي الفاتح.

2. إذا قمت بفتح ملفات Excel متعددة ، فهذا التركيز على الشبكة يتم تطبيق الميزة على كل منهم.

3. هذا التركيز على الشبكة لن يتم تمكينه تلقائيًا عند بدء تشغيل المصنف في المرة القادمة.

عرض التركيز على الشبكة


كوتولس ل إكسيل: أكثر من 300 أداة مفيدة في متناول يدك! ابدأ تجربتك المجانية لمدة 30 يومًا دون أي قيود على الميزات اليوم. تحميل الآن!

    يوصى باستخدام أدوات الإنتاجية
    يمكن للأدوات التالية توفير وقتك وأموالك بشكل كبير ، ما الأداة المناسبة لك؟
    تبويب أوفيس: استخدام علامات تبويب يدوية في مكتبك، كطريقة لمتصفحي Chrome و Firefox و Internet Explorer الجديد.
    كوتولس ل إكسيل: أكثر من 300 وظيفة متقدمة لبرنامج Excel 2021 و 2019 و 2016 و 2013 و 2010 و 2007 و Office 365.

    كوتولس ل إكسيل

    الوظيفة الموضحة أعلاه ليست سوى واحدة من 300 وظيفة قوية لـ Kutools for Excel.

    مصمم لـ Excel (Office) 2021 و 2019 و 2016 و 2013 و 2010 و 2007 و Office 365. تنزيل واستخدام مجاني لمدة 30 يومًا.

    لقطة شاشة لـ Kutools for Excel

    btn اقرأ المزيد      btn تنزيل     شراء btn

Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Why doesn't it open automatically at startup? it would be nice to remember the last setting
This comment was minimized by the moderator on the site
Hello, Mennan,
Sorry for the inconvenience, for the stability of the function, our feature is disabled when opening next time at present, but the last setting and operation can be remembered.
Thanks for your comment.
This comment was minimized by the moderator on the site
I have a problem with the reading layout. Every time when I start it, it behaves strangely. It "chose" a smaller size of the sheet than it is actually on my screen and it works in that sheet. Eg: if I see on my screen columns range from A up to AC and rows range from 1 up to 39, the reading layout chooses that my columns range from A up to half of X and rows range from 1 up to half of 32 and works in that let's call it window.
I tried to uninstall kutools and install it again, but the same problem remains.
Any wise advice would be appreciated from my side.
I am running MS office professional plus 2021.

Thanks in advance
This comment was minimized by the moderator on the site
I might detected the problem. I am running 3 displays, one from a laptop 15,6" and two others 24" over wavlink dock. All three displays are running at a resolution of 1920 x 1080. My main display is from the laptop.
I am using excel on another two 24" displays just because they have a bigger screen. When I put excel on the laptop window reading layout behaves as it should, and that is the exact size of the sheet that I previously described as a smaller window.
This comment was minimized by the moderator on the site
Hello, Dejan,
Thanks for your comment.
I have fed back this problem to the developers, if there is a an upgrade or fixed, we will let you know in the first time.
This comment was minimized by the moderator on the site
If you make this auto load when opening excel I will buy this product. :D
This comment was minimized by the moderator on the site
Hi, Andrei

Thanks for your comment, your suggestion has been fed back to the developers, if there's an upgrade, I'll let you know in the first time. 😄
This comment was minimized by the moderator on the site
Very Good Service Nice blog
This comment was minimized by the moderator on the site
Hello, Thanks for sharing this informative blog with us.
This comment was minimized by the moderator on the site
This feature is great. Bear in mind I had an existing Excel file where this button was ALWAYS disabled. I had to copy-and-paste the data out of the file and save it into a new file to get the "Reading Layout" button to enable. It then worked fine.
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.🙂
This comment was minimized by the moderator on the site
se eu compra a licença consigo instalar mais de uma vez no pc ou só serve uma vez ?
This comment was minimized by the moderator on the site
This solved one of my biggest headaches. I have one program that outputs a report that when exported to Excell it creates 200 worksheets! I have never been able to use it until now. Merging all of them into one worksheet only takes a few minutes with Kutools.
This comment was minimized by the moderator on the site
Thanks A lot of this product, mainly its use for reading layout & shortcuts of left side menu
This comment was minimized by the moderator on the site
My OS: Windows 7 Pro fully updated My Excel: 2010 My sheet: Range R1C6:R504C6 is in use PROBLEM: READING LAYOUT FAILS TO FILL ROW AND COLUMN SELECTED 1. Magnification: 60% 2. Rows 313-355 show 3. Cell R354:C6 selected 4. Column 5 fills to row 323. Row 354 no fill 5. Mag to 50% 6. Rows 311-357 show 7. Column 5 fills top to bottom. Row 354 fills left to right 8. Mag to 60%. Goto 4. 9. Mag to 70%. 10. Rows 319-354 show 11. Column 6 fills to row 325. Row 354 is empty. 12. Click R354:C6 13. No change! 14. WHY? NOTE: At 60% magnification selecting any cell on visible sheet on rows greater than 323 demonstrates same problem. Selecting row 323 or lower i.e R320 the function works as expected with row and column selected but only to row 323!
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations